![]() See “Section 4.4.2 Format” on page 83 for more details.Ĭhapter 1. Select the Date Format at the top of the screen. To set the Date Format, toggle right to Date Format and press SET. Toggle up and down to change the Date and press SET. When your SiOnyx Aurora is powered on for the first time, you will be prompted to set the date and time.Ĭhapter 1. To set the date and time manually, toggle down to Manual Set. You can also change the format of the date and time (see “Section 4.4.2 Format” on page 83). You can either set the time by GPS (Aurora 'classic' and Pro only) (see “Section 4.4.1 GPS Set” on page 80) or manually. Toggle down to Date and Time and toggle right to the Date and Time options. This warning will appear until the date and time are set.Ĭhapter 1. Press SET to access the WiFi/Settings menu. To set the date and time, rotate the Settings Dial to the WiFi/Settings menu. Getting Started WiFi/Setting 1.5 Setting the Date and Time 1. To insert the Micro SD card, remove the Viewfinder by pulling down on the Viewfinder Release button.Ĭhapter 1. You need to purchase a Micro SD/Micro SDHC Class 10 or UHS-1 with a capacity of up to 32GB. Note: The camera does not come with a Micro SD card. 1.4 Inserting the Micro SD Card The Micro SD card holds all your videos and photos. Getting Started 1.3.5 Focusing Ring Use the Focusing Ring to adjust the focus visually or by the distance settings on the dial. Diopter Dial Battery Micro SD card 1.3.4 Scene Ring Use the Scene Ring to adjust the lens to the time of day.Ĭhapter 1. The EVF will need to be removed to access the battery and Micro SD card. On the right side of the EVF is the Diopter Dial, which will allow you to focus without prescription glasses. Getting Started 1.3.3 Viewfinder The Electronic Viewfinder (EVF) contains a menu and control system for the camera. Getting Started 1.3.1 Button Overview Shutter Button (Single Shot, Video Start/Stop) Advanced Settings (Zoom, Gain, etc.) Scene Ring (Day, Twilight, Night) Focus Ring Power/Camera Mode (Photo, Video, Loop, Playback, Settings) 1.3.2 Settings Dial The Settings Dial turns the camera on and off as well as to set the camera mode.Ĭhapter 1. ![]() 1.3 Viewing the Camera Modes and Settings Here’s an overview of the camera buttons.Ĭhapter 1. The battery gauge icon is on the bottom right of the screen. Getting Started 1.2.2 Viewing the Battery Charge To view the remaining battery charge, rotate the Settings Dial to Photo, Video, Loop or WiFi/Settings. Slide the Viewfinder back into its slot.Ĭhapter 1. ![]() Press the tab on the left side of the battery and slide the battery out. Open the Viewfinder by pulling down on the Viewfinder Release button. Getting Started 1.2.1 Removing the Battery 1. Note: It will take about 2-3 hours to charge the battery to 100% and it will last ~2 hours of shooting video.Ĭhapter 1. When the battery is fully charged, the light will turn off. A green light appears and blinks slowly during the charging process. Connect the camera to a powered-on computer or plug it into a wall charger using the supplied Micro USB cable. Insert the Micro USB cable into the camera USB port. ![]() Slide the battery into the battery slot.Ĭhapter 1. Remove the Viewfinder by pulling down on the Viewfinder Release button. Make sure the camera is in OFF mode.Ĭhapter 1. Click here to view a related video To charge the battery: 1. Getting Started Congratulations on purchasing your new SiOnyx Aurora Night Vision camera! Let’s get started! 1.2 Charging the Battery The first thing you need to do after unpacking the camera is to charge the battery. 6 1.2.1 Removing the Battery.Ģ.3.4 Self Timer.42 2.3.5 Panorama.44 2.3.6 Time Lapse.45 2.4 Shooting Photos and Videos: Advanced Settings.Ĭhapter 5. SiOnyx, LLC 100 Cummings Center, Suite 303B Beverly, MA 01915 U.S.A. AURORA FAMILY OF CAMERAS SPORT/BLACK/CLASSIC/PRO User Manual
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |